Livento GmbH

4.3/5 based on 8 reviews

Contact Livento GmbH

Address :

Reischekstraße 4, 4020 Linz, Austria

Phone : 📞 +78
Website : http://www.livento.at/
Categories :
City : Linz

Reischekstraße 4, 4020 Linz, Austria
M
Markus Schmitzberger on Google

H
Harald Pal on Google

B
Bernd Breg on Google

G
Gerhard Lackner on Google

D
Davide Ioris on Google

R
RLQ Medien GmbH on Google

Top Beratung! Top Service!
Top advice! Top service!
G
Gerhard Moser on Google

Unübersichtlich, ich habe nach Gebrauchsanweisung gesucht, aber nicht gefunden.
Confusing, I looked for instructions for use, but couldn't find it.
M
Markus Zöchling on Google

Im Haus-Projekt enthalten waren 6 Stück Wohnraumlüftung, es war das Modell Aeroline ALM. Geliefert wurden die WRL von Livento. Diese Wohnraumlüftung wird mit leichten Modifikationen auch unter anderen Marken- und Typenbezeichnungen verkauft. Ich habe mir noch die optionalen Luftqualitätssensoren hinzugenommen. Nun gab es seit Einbau laufend Ärger mit den Geräten, z. B.: * Bei Minus-Temperaturen fingen Relais an (laut und) laufend zu schalten. * Dann war der Lüften in Betrieb, aber als ich mit einer Feuerzeugflamme zum Luftstrom hielt konnte ich feststellen, dass keine Luft transportiert wurde. * Ohne erkennbaren Grund schaltete nachts plötzlich das Gerät auf eine sehr hohe Stufe und riss uns aus dem Schlaf. * Im Winter gibt es an den Geräten am Verputz Eis-Bildung, ich bin mir sicher, dass das die Lebenszeit des Verputzes senkt. * Bei der LED-Beleuchtung fangen einzelne Leuchtpunkte an, dunkler zu leuchten. * Die Luft-Sensoren reagierten nicht auf kontaminierte Luft * Bei einem unbewohnten Raum regelte der Sensor nie die Drehzahl auf den (in der Betriebsanleitung) niedrigsten Wert. * Die in der Beschreibung angegebenen Luftmengen konnten nicht erreicht werden. *Zwischen Mauerwerk und Geräteabdeckung gab es große Schlitze, das führte zu signifikanten Performance-Verlusten. Man hat das (meiner Meinung nach notdürftig) mit Schaumstoff-Streifen versucht zu verbessern. Die Geräte wurden mehrmals, auch vom Hersteller getauscht, aber die Probleme waren nicht gelöst. Die Infos von Livento waren mir persönlich irgendwie zu schwammig. Alles kostete mir viel Zeit und Nerven. Meine Betriebsanleitung war anders als andere. Die Geräte sind nicht günstig und der Marktpreis von 6 Stück ist nicht zu vernachlässigen. Rund 3,5 Jahre nach Einzug beschlossen wir vor Gericht die Geräte von einem SV begutachten zu lassen. Er hat sich dann ein paar meiner kritisierten Punkte angesehen und (meiner Meinung nach zum Glück für den Lieferanten) ein paar andere nicht. Aus dem Bericht habe ich viel gelernt. Es gibt Vorgaben von Normen (ÖNORM H6038:2006). Schlaf-, Kinder- und Gästezimmer dürfen einen Schalldruckpegel von 25db(A) nicht überschreiten; im Wohnzimmer, Küche, Bad, WC Abstellraum sind es 35db(A). Im Schlafzimmer (2 Personen) sind 35m3/h zu erreichen. Um die Luftmenge im Schlafzimmer zu erreichen ist Stufe 3 notwendig, das wären nach Betriebsanleitung 41db(A). Wobei ich persönlich vermute, dass Lüftungen in der Praxis etwas lauter sind als in der Betriebsanleitung. Ich persönlich habe mir Sensoren gekauft damit die Geräte 21db(a) haben, aber 41 db(A) ist mir wirklich viel zu laut. Der SV scheibt „Der Grund für die bemängelte Eiszapfenbildung und der Kondensataustritt unterhalb des Gehäuses liegt darin das die Fortluft der Geräte bei tiefen Außentemperaturen an der Außenabdeckung kondensiert und nicht über die vorgesehene Kondensaleitung abgeführt wird. „Dieser Umstand hätte durch geeignete Maßnahmen verhindert werden müssen und stellt daher einen Mangel dar.“ „Die, im Gerät integrierte Kondensatableitung entwässert lediglich den Wärmetauscher. Die Kondensatentwässerung welche bei kalter Umgebung an der Außenabdeckung entsteht ist nicht vorhanden und stellt somit einen Mangel dar. Da vom Gerät diese Möglichkeit nicht vorgesehen ist, hätte der Kondensataustritt (Eiszapfenbildung, Wasserspuren an der Fassade) durch andere, geeignete Maßnahmen verhindert, oder in anderes, geeignetes Gerät verwendet werden müssen.“, „Im Schlafzimmer hätte ein 2. Gerät oder ein Gerät mit höherer Luftleistung entsprechend maximalen Schalleistungspegel vorgesehen werden müssen.“ Was ich noch gesehen und mitprotokolliert habe. Luftmengen wurden vom SV an der Außenwand und an der Innenwand gemessen. Die Luftmenge war an der Außenwand rund doppelt so hoch, als an der Innenwand gemessen. Hier fehlt mir (obwohl ich selbst ausgebildeter Techniker bin) noch eine schlüssige Erklärung! In der Anleitung steht Wärmebereitstellungsgrad 83% bzw 87%. Ich habe - unter Anwesenheit von Sachverständigen - den Wirkungsgrad gemessen, der liegt unter 35% (!).
The house project included 6 ventilation units, it was the Aeroline ALM model. The WRL were supplied by Livento. With slight modifications, this domestic ventilation is also sold under other brand and type names. I also added the optional air quality sensors. Now there has been constant trouble with the devices, e.g. B .: * At minus temperatures, relays started to switch (loud and) continuously. * Then the ventilation was on, but when I held the lighter flame to the airflow, I noticed that no air was being transported. * For no apparent reason, the device suddenly switched to a very high level at night and woke us up from sleep. * In winter there is ice formation on the plastering equipment, I am sure that this will reduce the plastering life. * With LED lighting, individual luminous dots begin to glow darker. * The air sensors did not respond to contaminated air * In an uninhabited room, the sensor never set the speed to the lowest value (in the operating instructions). * The air volumes specified in the description could not be achieved. * There were large slots between the masonry and the device cover, which resulted in significant performance losses. An attempt was made (in my opinion makeshift) with foam strips. The devices were replaced several times, also by the manufacturer, but the problems were not solved. The information from Livento was somehow too vague for me personally. Everything cost me a lot of time and nerves. My operating instructions were different from others. The devices are not cheap and the market price of 6 pieces is not to be neglected. Around 3.5 years after moving in, we decided to have the devices inspected by a SV in court. He then looked at a few of my criticized points and (luckily for the supplier in my opinion) a few others. I learned a lot from the report. There are specifications of standards (ÖNORM H6038: 2006). Sleeping rooms, children's rooms and guest rooms must not exceed a sound pressure level of 25db (A); in the living room, kitchen, bathroom, toilet storage room it is 35db (A). In the bedroom (2 people) 35m3 / h can be reached. To reach the air volume in the bedroom, level 3 is necessary, which would be according to the operating instructions 41db (A). However, I personally suspect that ventilation is somewhat louder in practice than in the operating instructions. I personally bought sensors so that the devices have 21db (a), but 41 db (A) is really too loud for me. The SV writes: "The reason for the faulty icicle formation and the condensate discharge below the housing is that the exhaust air from the devices condenses on the outer cover at low outside temperatures and is not discharged via the condensation line provided. "This should have been prevented by taking suitable measures and is therefore a deficiency." The condensate drainage that occurs on the outer cover in a cold environment is not available and therefore represents a defect. Since this option is not provided by the device, the condensate leakage (icicle formation, water traces on the facade) would have been prevented by other suitable measures or in another way , suitable device must be used. "," In the bedroom a second device or a device with higher air output corresponding to the maximum sound power level should have been provided. " What I saw and recorded. Air volumes were measured by the SV on the outer wall and on the inner wall. The amount of air on the outer wall was around twice as high as measured on the inner wall. Here (although I myself am a trained technician) I still lack a conclusive explanation! In the instructions, the degree of heat provision is 83% or 87%. In the presence of experts, I measured the efficiency, which is below 35% (!).

Write some of your reviews for the company Livento GmbH

Your reviews will be very helpful to other customers in finding and evaluating information

Rating *
Your review *

(Minimum 30 characters)

Your name *